Reset Search
 

 

Article

Using the Convex Corner Curve (Edit Worktop) in 2020 Fusion

« Go Back

Information

 
Article Number000009394
TitleUsing the Convex Corner Curve (Edit Worktop) in 2020 Fusion
Applies to2020 Fusion; 2020 Fusion live
Body of the Article

Applies to:

2020 Fusion and 2020 Fusion Live

Using the Convex Corner Curve (Edit Worktop) in 2020 Fusion

Please see the steps below for using the Convex Corner Curve tool:


1. Go to Insert Auto Features.


2. Click on the drop down arrow and select Edit Worktops.


Note: This can also be accessed when running Auto Features and ticking the Edit Worktops box.

Edit WT


3. Make sure the Convex Corner Curve tool button is selected. 

CCC
CCC Title

4. Select a corner to cut by left clicking on one of the red squares.

Corner Point

5. You can now curve your selected corner by moving the mouse and left clicking when you want to stop.


Alternatively, you can enter the exact measurement in the X and Y offset after left clicking the red square and simply press Tab after entering the value of X and Enter once you have input the value of Y.

Offset

6. Once you have curved your required corners, click through the next stage buttons and click finish.

Next
Finish

Related Articles:
An Introduction to the Edit Worktop Tools in 2020 Fusion
URL NameUsing-the-Convex-Corner-Curve-Edit-Worktop-in-2020-Fusion

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255