Reset Search
 

 

Article

Using the Convex Arc (Edit Worktop) in 2020 Fusion

« Go Back

Information

 
Article Number000009282
TitleUsing the Convex Arc (Edit Worktop) in 2020 Fusion
Applies to2020 Fusion; 2020 Fusion live
Body of the Article

Applies to:

2020 Fusion and 2020 Fusion Live

Using the Convex Arc (Edit Worktop) in 2020 Fusion

Please see the steps below for using the "Convex Arc" tool:


1. Go to Insert Auto Features.


2. Click on the drop down arrow and select Edit Worktops.


Note: This can also be accessed when running Auto Features and ticking the "Edit Worktops" box.

Edit WT

3. Make sure the Convex Arc tool button is selected. 

CA Tool
CA Info

4. Select an edge to apply the convex arc to by left clicking on one of the red squares.

ConArc1

5.You can now apply your convex arc to your selected side by moving the mouse and left clicking when you want to stop.

Alternatively, you can enter the exact measurement in the X offset or "Radius" fields after left clicking the red square and pressing Enter once you have entered the value.

X or Radi
6. Once you have applied your convex to your required edge(s), click through the Next Stage buttons and click Finish.

Next
Fin

Related Articles:
An Introduction to the Edit Worktop Tools in 2020 Fusion

 
URL NameUsing-the-Convex-Arc-Edit-Worktop-in-2020-Fusion

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255