Reset Search
 

 

Article

Using the Double Corner Cut (Edit Worktops) in 2020 Fusion

« Go Back

Information

 
Article Number000009405
TitleUsing the Double Corner Cut (Edit Worktops) in 2020 Fusion
Applies to2020 Fusion; 2020 Fusion live
Body of the Article

Applies to:

2020 Fusion and 2020 Fusion Live

Using the Double Corner Cut (Edit Worktops) in 2020 Fusion

Please see the steps below for using the Single Corner Cut tool:


1. Go to Insert Auto Features.


2. Click on the drop down arrow and select Edit Worktops.


Note: This can also be accessed when running Auto Features and ticking the Edit Worktops box.

wt

3. Make sure the Double Corner Cut tool button is selected. 

DCCT
Double Corner Cut

4. Select a corner to cut by left clicking on one of the red squares.

Corner Point

5. You can now cut your selected corner by moving the mouse and left clicking when you want to stop.


Alternatively, you can enter the exact measurement in the X and Y offset after left clicking the red square and simply press Tab after entering the value of X and Enter once you have input the value of Y.

Offset

6. Once you have cut your required corners, click through the next stage buttons and click finish.

Next
Finnish

Related Articles:
An Introduction to the Edit Worktop Tools in 2020 Fusion
URL NameUsing-the-Double-Corner-Cut-Edit-Worktops-in-2020-Fusion

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255